Tips For Using Trail Cameras

If you have purchased one of the amazing trail cameras on the market, you may be wondering how to get the best use out of it. We believe in educating our readers about the proper use of trail cameras and what they can do to get the best pictures and the most use from their game cameras. We have created a list of tips for using trail cameras so you can capture nature and get the best results from using your trail camera no matter what purpose you bought them for. Follow these tips and you will be capturing great pictures in no time at all.

tips for using a trail camera

Before You Start, Update The Cameras Software

People who own cameras commonly overlook this step. If you are using your camera for a specific purpose, you want to make sure you update your cameras software before you start. Every camera runs off of software or firmware and often come with an operation CD or a link to a website. You can get the updates through the cameras manufacturing website. You want to make sure that you follow all the instructions for the software updates, or you could risk killing the batteries or other parts of the camera. Once you have updated he software, you are ready to go capture some incredible pictures.

Number Your Cameras & Track GPS Locations

Some people who use these cameras will use multiple trail cameras to track their findings. Using multiple cameras is a great way to get results, but it can be difficult to find all your cameras when the collection is done. So you don’t risk losing these expensive cameras, you are going to want to number your cameras before you set them up. You may also want to track the GPS location of the cameras and record it in a log just in case you have a difficult time remembering exactly where you put the cameras.

Angle The Camera To The Trail

If you are looking to capture a certain location for animals or other nature, you want to make sure you angle the camera to the trail. If you don’t angle the camera, there is a good possibility that you are going to miss the target and end up with a lot of bad pictures. You want to make sure you angle the camera at a 45 degree angle to the trail so you are getting a great range of space and better pictures. If you don’t angle the camera, you may end up with pictures of the top of an animal’s head or a tree from across the way.

Remove Obstructions and Test Position

When you set up the camera, you are going to want to check the positioning of the camera to make sure you are going to get the shot that you want. You are also going to want to check for and remove anything that may obstruct the view of the camera and block your shot. If you want to get a clear shot, check for any hanging branches or bushes that may block the cameras view.